Synthesis,Electrical, Electronic and Charge Transport Properties of Poly(aniline‐co‐p‐toluidine)

Copolymers of aniline with p‐toluidine were synthesized for different molar ratios of the respective monomers in acid medium. The electrical conductivity, charge transport and spectral characteristics upon incorporation of p‐toluidine units into the polyaniline backbone were investigated. The electrical conductivity of the copolymers showed frequency dependence which became more prominent with an increase in the number of p‐toluidine units in the polyaniline backbone. A direct relationship between the frequency dependence and electron localization was observed in the copolymers. Electronic spectra showed blue shifts in the π→π*and benzenoid→quinoid transitions revealing a decrease in the extent of conjugation in the copolymers. The protonated forms of the copolymers were soluble in DMSO giving polaron band around 400 nm. The decrease in electrical conductivity was attributed to the greater electron localizations as revealed from the broader ESR signals. Temperature dependence of electrical conductivity showed that charge transport was mainly through variable range hopping though a mixed conduction behavior was observed at higher temperature range.     

Quenching effect of l-tyrosine on peroxyoxalate chemiluminescence of berberine as the fluorophore

The present work deals with the first attempt to study the effect of l-tyrosine on the characteristics of the peroxyoxalate chemiluminescence. Berberine was applied as an efficient fluorophore. The investigated parameters include rise and fall rate constant for the chemiluminescence burst, theoretical and experimental maximum intensity, the time needed to reach maximum intensity and the total light yield emission, which is theoretically evaluated using the pooled intermediate model by a computerized non-linear least-squares curve fitting program (KINFIT). Furthermore, based on the observed quenching effect of tyrosine, the Stern–Volmer plot with K _Q value of 7.7 × 10⁴ M^?1 in the quencher concentration range 4 × 10^?6–5 × 10^?5 M. Moreover, this method is applied to determinate tyrosine in biological samples successfully.     

Highly Selective One-Pot Coupling Reaction of Indole,Aromatic Aldehydes,and 4-hydroxycoumarin Using Copper Octoate as a Homogeneous Catalyst

A facile protocol for the one-pot, multicomponent reaction of indole, 4-hydroxycoumarin, and aromatic aldehydes was developed using copper octoate as an inexpensive, commercially available, and efficient catalyst. This highly selective reaction eliminates the formation of homodimeric by-products (bisindoles and biscoumarins) and selectively results in the formation of heterodimeric adducts containing both indole and coumarin heterocycles.     

Synthesis and application of silica and calcium carbonate nanoparticles in the reduction of organics from refinery wastewater

Oil refinery is one of the fast growing industries across the globe and it is expected to progress in the near future. The worldwide increase in the generation of refinery wastewater along with strict environmental regulations in the discharge of industrial effluent, persistent efforts have been devoted to recycle and reuse the treated water. The wastewater from the refining operation leads to serious environmental threat to the ecosystem. Therefore, this study aimed to synthesize silica (SiO₂) and calcium carbonate nanoparticles (CaCO₃) in the reduction of organics from refinery wastewater. The synthesized nanoparticles were employed in the reduction of chemical oxygen demand (COD) from refinery wastewater by studying the influence of solution pH, contact time, dosage of nanoparticles and stirring speed on adsorption performance. From the batch experimental studies, the optimized processing conditions for the reduction of COD using SiO₂ nanoparticles are pH 4.0, dosage 0.5 g, stirring speed 125 rpm and 90 min stirring time, and the corresponding values for CaCO₃ nanoparticles are pH 8.0, dosage 0.4 g, stirring speed 100 rpm and 90 min stirring time. The study demonstrates that SiO₂ and CaCO₃ nanoparticles have a promising future in the reduction organics from refinery wastewater in different pH regimes.     

Reactive sensing capability towards the working electrical and chemical conditions of poly (aniline –co–o-toluidine) copolymers

Conducting polymers are considered as reactive gels which can sense the working ambient through their unique electrochemical reaction. Copolymers of aniline with o-toluidine for three different monomer compositions were synthesized chemically and were characterized using FTIR and UV-Vis spectroscopy, SEM, TGA, and cyclic voltammetry. The electrochemical reactive sensing characteristics with respect to the electrical and chemical working conditions of the copolymers were verified and compared through Chronopotentiometric responses in aqueous solutions of HCl by changing the reaction variables: applied current and chemical environment (electrolyte concentration) at a fixed constant charge. The consumed electrical energy during the electrochemical reaction of the copolymers varies linearly with the driving current and follows a logarithmic dependence on the electrolyte concentration. The consumed electrical energy during the reaction was found to act as the sensing parameter. At the same experimental condition, the sensitivity was associated with the conductivity of the copolymers. The highly conducting composition gives the highest sensitivity. These experimental results were fitted with the theoretical equation.

     

Malformin-A1 (MA1) Sensitizes Chemoresistant Ovarian Cancer Cells to Cisplatin-Induced Apoptosis

High-grade epithelial ovarian cancer is a fatal disease in women frequently associated with drug resistance and poor outcomes. We previously demonstrated that a marine-derived compound MalforminA1 (MA1) was cytotoxic for the breast cancer cell line MCF-7. In this study, we aimed to examine the effect of MA1 on human ovarian cancer cells. The potential cytotoxicity of MA1was tested on cisplatin-sensitive (A2780S) and cisplatin-resistant (A2780CP) ovarian cancer cell lines using AlamarBlue assay, Hoechst dye, flow cytometry, Western blot, and RT-qPCR. MA1 had higher cytotoxic activity on A2780S (IC50 = 0.23 µM) and A2780CP (IC50 = 0.34 µM) cell lines when compared to cisplatin (IC50 = 31.4 µM and 76.9 µM, respectively). Flow cytometry analysis confirmed the cytotoxic effect of MA1. The synergistic effect of the two drugs was obvious, since only 13% of A2780S and 7% of A2780CP cells remained alive after 24 h of treatment with both MA1 and cisplatin. Moreover, we examined the expression of bcl2, p53, caspase3/9 genes at RNA and protein levels using RT-qPCR and Western blot, respectively, to figure out the cell death mechanism induced by MA1. A significant down-regulation in bcl2 and p53 genes was observed in treated cells compared to non-treated cells (p < 0.05), suggesting that MA1 may not follow the canonical pathway to induce apoptosis in ovarian cancer cell lines. MalforminA1 showed promising anticancer activity by inducing cytotoxicity in cisplatin-sensitive and cisplatin-resistant cancer cell lines. Interestingly, a synergistic effect was observed when MA1 was combined with cisplatin, leading to it overcoming its resistance to cisplatin.     

Functional Properties and Molecular Degradation of Schizostachyum Brachycladum Bamboo Cellulose Nanofibre in PLA-Chitosan Bionanocomposites

The degradation and mechanical properties of potential polymeric materials used for green manufacturing are significant determinants. In this study, cellulose nanofibre was prepared from Schizostachyum brachycladum bamboo and used as reinforcement in the PLA/chitosan matrix using melt extrusion and compression moulding method. The cellulose nanofibre(CNF) was isolated using supercritical carbon dioxide and high-pressure homogenisation. The isolated CNF was characterised with transmission electron microscopy (TEM), FT-IR, zeta potential and particle size analysis. The mechanical, physical, and degradation properties of the resulting biocomposite were studied with moisture content, density, thickness swelling, tensile, flexural, scanning electron microscopy, thermogravimetry, and biodegradability analysis. The TEM, FT-IR, and particle size results showed successful isolation of cellulose nanofibre using this method. The result showed that the physical, mechanical, and degradation properties of PLA/chitosan/CNF biocomposite were significantly enhanced with cellulose nanofibre. The density, thickness swelling, and moisture content increased with the addition of CNF. Also, tensile strength and modulus; flexural strength and modulus increased; while the elongation reduced. The carbon residue from the thermal degradation and the glass transition temperature of the PLA/chitosan/CNF biocomposite was observed to increase with the addition of CNF. The result showed that the biocomposite has potential for green and sustainable industrial application.     

Incorporating homonuclear polarization transfer into PRESS for proton spectral editing: illustration with lactate and glutathione

A proton spectral editing pulse sequence for the detection of metabolites with spin systems that involve weak coupling is presented. The sequence is based on homonuclear polarization transfer incorporated into the standard PRESS (Point RESolved Spectroscopy) sequence, which is a volume-selective double spin echo method, to enable spatial localization. All peaks in the region of interest are initially suppressed whether they are peaks from the target metabolite or from contaminating background. The target signal is then restored by polarization transfer from a proton that has a resonance outside the suppressed region and to which the target spins are weakly coupled. This is achieved by the application of a 90 degrees hard pulse with phase orthogonal to that of the PRESS excitation pulse at the location of the first echo in PRESS and by optimizing the two PRESS timings, TE(1) and TE(2), for most efficient yield. Background signal not coupled to any protons outside the initially saturated region remains suppressed. The advantage of this sequence compared to multiple quantum filters is that signal from singlet peaks outside the suppressed area are preserved and can thus be used as a reference. The efficacy of the sequence was verified experimentally on phantom solutions of lactate and glutathione at 3.0 T. For the AX(3) spin system of lactate, the sequence timings were optimized by product operator calculations whereas for the ABX spin system of the cysteinyl group of glutathione numerical calculations were performed for sequence timing optimization.